+86-400-1866-598 cs@chinasteelmarket.com
Login | Register
China Steel Market
Empowering small and medium-scale steel purchasing
Get quotes from CS
About CSMC
Quickly obtain FOB/CIF price
Home > Articles

Articles

Categories

Short News
25/12 16:16
< Cold Rolled Steel Plate, size: 1.5*1250*2500, grade: SPCC(ASTM A1008 CS), brand: LIUGANG. Tangshan - Lunan increased by 36.84 tons
25/12 16:16
< Cold Rolled Steel Sheet & Coil, size: 1.5*1250*C, grade: ST12(ASTM A1008 CS), brand: ANGANG. Tianjin - Gangrui reduction by --26.22 tons
25/12 16:16
< Prepainted Steel Coil, size: 0.5*1000*C, grade: TDC51D+Z(ASTM A755/A755M), brand: BAOSTEEL. Shanghai - Caoan increased by 31.50 tons
25/12 16:15
< Hot Rolled Pickled Coil, size: 3.0*1250*C, grade: SPHC(A1011 CS Type B), brand: TANGGANG. Tangshan - Lunan reduction by --38.38 tons
25/12 16:15
< Wire Rod, size: Φ6, grade: HPB300(ASTM A615 Grade 40), brand: YONGFENG. Qingdao - Chengyang increased by 13.03 tons
25/12 16:15
< Rebar, size: Φ40, grade: HRB500E(ASTM A615 Grade 75), brand: SHAGANG. Shanghai - Caoan reduction by --15.64 tons

Answers

  • What are the differences in thickness and production process between medium and thick steel plates and hot rolled steel plates?

    Medium and thick steel plates refer to steel plates with a thickness between 4-60mm, and their production processes mainly include hot rolling cold rolling, and medium and thick plate rolling. Hot rolling is to produce steel plates by continuous rolling after heating the steel billet to a certain temperature; cold rolling is to produce steel plates by continuous rolling after cooling the steel billet to a certain temperature; medium and thick plate rolling is to roll the steel plates produced by hot rolling or cold rolling again to achieve the required thickness.

    Hot rolled steel plates refer to flat steel plates produced by hot rolling, and their thickness is generally between 3-20mm. The production process of hot-rolled flat plates mainly includes hot rolling, pickling, and leveling. Hot rolling is to produce steel plates by continuous rolling after heating the steel billet to a certain temperature; pickling is to remove the iron oxide and impurities on the surface of the steel plate; leveling is to level the steel plate through a leveling machine to achieve the required flatness.
  • What are the differences between PE lining and plastic coating?

    PE lining is made of thermoplastic plastic pipes such as polyethylene (PE), heat-resistant polyethylene (PE-RT), cross-linked polyethylene (PE-X), and so on, which are lined on the inner wall of steel pipe according to the requirements of the conveying medium, so it has the advantages of both steel pipe and plastic pipe.
    Plastic-coated composite steel pipe is a steel-plastic composite product with steel pipe as the base material and plastic powder as the coating material, with a plastic layer melt-coated on the inner surface and a plastic layer or other material anti-corrosion layer melt-coated on the outer surface.
    According to the different inner coating materials, there are two types, one is polyethylene-coated steel pipe. The other is epoxy resin-coated steel pipe.
  • What are the acceptance criteria for hot-dip galvanized square tubes?

    Hot-dip galvanized square tubes are generally judged to be qualified based on the appearance of the product. If the outer wall of the square tube has plating defects, pitting, white spots, heavy skin, bubbles, greening, etc., and the frequency of occurrence is too high, it is judged as an unqualified product. However, the product standard has a specified range for the allowable deviation of the product, which should meet the design requirements and relevant standards.
Timely Info Independent Platform Multiple guarantees Self-operated storage

China Steel Market

Empowering small and medium-scale steel purchasing

About us Channel Useful tools
About China Steel Market Prices Steel weight calculation
Contact us Answers
Terms & Conditions Inventory
Privacy Policy Help

Hot search words:

China Rebar prices